How To Make A Pattern

Creating a pattern is as easy as tracing your opening. You can use quality Kraft paper or cardboard.

1. Remove your existing windows to acquire the exact hole measurements and shape. The current windows will not work as a pattern as they do not tell us how they fit in the current hole.
2. Attach quality Kraft paper covering to the inside of the window.
3. Using a black thin felt, trace the window opening from the outside of the boat.
4. Review the pattern to see if the lines are straight and parallel. If the opening is uneven or not parallel, provide instructions on how you want the window to fit.
5. Specify on your patterns the following points. You may also fill out the “Window Sheet” form shown below and attach it to each template
   1. Outside or inside drawn
   2. The window number
   3. Label top side or down side
   4. Port or Starboard
   5. Forward or Aft
   6. Which way you want it to slide
   7. The Glass color
6. Send all your patterns by courier to our attention.
7. Patterns are not required for door cut outs.
8. Any patterns noncompliant will be subject to a $150 administration fee.

Please Complete This Form and Attach To Template You Will Be Providing – Window Sheet  & Boat Layout

Diagram Details

• Forward (FWD): Top of the diagram
• Aft: Bottom of the diagram
• Port Side: Left side
• Starboard Side (STBD): Right side
• Perimeter markings indicate potential window or portlight positions

Customer Information

• Customer: [Blank]
• PO# or Boat Name: [Blank]

Company Information

AJR Marine Windows Inc.

Point Coupee, Louisiana, USA

Phone: 800-844-1016

Proprietary Notice

This drawing contains proprietary information owned by AJR Marine Windows Inc. Any unauthorized use is prohibited.

Key plan schematic of a boat outline viewed from above, labeled with FWD at top, AFT at bottom, PORT SIDE on left, STBD SIDE on right, and perimeter positions for windows.Key Plan Diagram

Template Details

• Orientation: Top View, FWD (Forward)
• Side: Port Outside View
• Model: A150 Slider with Screen
• Glass: 6mm Clear Laminated
• Wall Thickness: 1/8″
• Sliding Direction: Slides Left
• Number: #3

Dimensions (For Quoting)

• Width: 36″
• Height: 24″

Company Information

AJR Marine Windows Inc.

Point Coupee, Louisiana, USA

Phone: 800-844-1016

Proprietary Notice

This drawing contains proprietary information owned by AJR Marine Windows Inc. Any unauthorized use is prohibited.

Sample template pattern showing trapezoidal shape with labels for FWD top, port outside view, A150 slider with screen, 6mm clear laminated, 1/8″ wall, slides left, 36″ wide, 24″ high, #3.Sample Template Pattern

© AJR Marine Windows Inc.

Overview

TIGER Drylac Series 38 offers super durable powder coatings compliant with AAMA 2604-05 standards, suitable for architectural applications requiring high weather resistance.

Red stadium seats in an outdoor arena.Stadium Seating ApplicationModern high-rise building with curved balconies under blue sky.High-Rise Architectural ApplicationOrnate street lamps at sunset.Lighting Fixtures Application

TIGER Drylac Powder Coatings

TIGER Drylac Logo